Contact
Design
codes implemented in CYPE programs
CYPE programs have a wide range of national and international codes available which are applied to carry out the analysis, design and check of reinforced concrete, rolled steel, welded steel, cold-formed steel, composite, aluminium and timber structures for gravitational, wind, seismic and snow loads.
CYPE's building services programs contain design codes which are used to analyse and design building services (water supply, waste water, air conditioning, solar capture for hot sanitary water, lightning protection, lighting, gas, electricity and telecommunication installations), and to check thermal and acoustic insulation, the building's energy certification and fire safety.
Amongst the codes contemplated in CYPE software are codes currently in force, and those which a no longer in use but are still required, either to check structures which were designed when they could be applied, or because they are still applicable in countries other than those of their origin.
Depending on the country where the user acquires the license (or where he/she specifically chooses to acquire it), only the design codes corresponding to that country will be activated for each program, regardless of the language in which it is installed.
The design codes and programs corresponding to other countries, which are not included in the user license, can be acquired separately. Please contact us for more information.
Displayed below is the collection of design codes contemplated by CYPE’s structural software.
- Concrete structures
- Rolled and welded steel structures
- Cold-formed steel structures
- Concrete and steel composite structures
- Concrete block structures
- Aluminium structures
- Timber structures
- Loads on structures. Wind loads
- Loads on structures. Earthquake loads
- Loads on structures. Snow loads
- Load combinations for structures
- Acoustic insulation
- Thermal analysis and energy certification
- Safety in case of fire
- Building services
- Programs and design codes included in the user license
| Concrete structures | |||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
||||||||||||||||||||||||||||||||||||||||||||
Bolivia
Malaysia
Russian Federation
South Africa| Rolled and welded steel structures | |||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
||||||||||||||||||||||||||||||||
| Cold-formed steel structures | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
||||||||||||||||||||||||||||
| Concrete and steel composite structures | |||
|---|---|---|---|
|
|||
| Concrete block structures | |||||||
|---|---|---|---|---|---|---|---|
|
|
||||||
| Aluminium structures | |||
|---|---|---|---|
|
|||
| Timber structures | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
||||||||||||||
| Loads on structures. Wind loads | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
China
Costa Rica
Cuba
Cyprus
Dominican Republic
Ecuador
Guatemala
Honduras
International
Nicaragua
Panama
Paraguay
Uruguay
Venezuela| Loads on structures. Earthquake loads | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
El Salvador
Puerto Rico| Loads on structures. Snow loads | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
||||||||||||||||||||||||
| Load combinations for structures | |||
|---|---|---|---|
 Algeria |
Concrete structures | Load combination codes used with BAEL-91 (R-99) |
|
 Argentina |
Concrete structures | Load combination code used with CIRSOC 201-2005 |
|
| Load combination codes used with CIRSOC 201-1982 |
|
||
 Belgium |
Timber structures | Load combination code used with Eurocode 5 (Belgium) |
|
 Brazil |
Concrete structures | Load combination code used with ABNT NBR 6118:2003 |
|
| Load combination codes which can be used with NB-1 |
|
||
| Rolled and welded steel structures | Load combination code used with ABNT NBR 8800:2008 |
|
|
| Load combination code used with ABNT NBR 8800:1986 |
|
||
| Cold-formed steel structures | Load combination code used with ABNT NBR 14762:2001 |
|
|
| Load combination code used with AISI (Brazil) |
|
||
| Timber structures | Load combination code used with ABNT NBR 7190 |
|
|
 Bulgaria |
Concrete structures | Load combination code used with Eurocode 2 (Bulgaria) |
|
| Rolled, welded and cold-formed steel structures | Load combination code used with Eurocode 3 (Bulgaria) |
|
|
 Canada |
Rolled and welded steel structures | Load combination code used with CAN/CSA S16-01 |
|
| Cold-formed steel structures | Load combination code used with CAN/CSA S136-07 |
|
|
 Chile |
Concrete structures | Load combination code used with ACI 318-99 (Chile) |
|
| Rolled, welded and cold-formed steel structures | Load combination code used with NCh427 |
|
|
 EU International |
Concrete; rolled, welded and cold-formed steel; concrete and steel composite; concrete block; aluminium; timber structures | Load combination code used with all the implemented Eurocodes |
|
 France |
Concrete structures | Load combination codes used with BAEL-91 (R-99) |
|
| Rolled, welded and cold-formed steel structures | Load combination code used with Eurocode 3 (France) |
|
|
| Timber structures | Load combination code used with Eurocode 5 (France) |
|
|
 Germany |
Rolled, welded and cold-formed steel structures | Load combination code used with DIN 18800:2008-11 |
|
 India |
Concrete structures | Load combination code used with IS 456:2000 |
|
 Italy |
Rolled, welded and cold-formed steel structures | Load combination code used with Eurocode 3 (Italia) |
|
 Mexico |
Cold-formed steel structures | Load combination code used with AISI/NASPEC – 2007 (LRFD) (Mexico) |
|
| Mexico, CDMX |
Rolled and welded steel structures | Load combination code used with NTCRC Estruct.Metal. |
|
| Concrete and concrete block structures | Load combination code used with NTCRC |
|
|
 Morocco |
Concrete structures | Load combination codes used with BAEL-91 (R-99) |
|
 Peru |
Concrete structures | NTE E.060:2009 |
|
| Load combination code used with ACI 318M-99 |
|
||
 Portugal |
Concrete structures | Load combination code used with Eurocode 2 (Portugal) |
|
| Load combination code used with REBAP |
|
||
| Rolled and welded steel structures | Load combination code used with Eurocode 3 (Portugal) |
|
|
| Load combination code used with REAE |
|
||
| Cold-formed steel structures | Load combination code used with Eurocode 3 (Portugal) |
|
|
| Load combination code used with MV110 (Portugal) |
|
||
 Romania |
Concrete structures | Load combination code used with Eurocode 2 (Romania) |
|
 Spain |
Concrete structures | Load combination code used with EHE-08 |
|
| Load combination codes which can be used with EHE-98 |
|
||
| Load combination code used with EH-91 |
|
||
| Rolled and welded steel structures | Load combination code used with CTE DB SE-A |
|
|
| Load combination code used with EA-95 (MV103) |
|
||
| Cold-formed steel structures | Load combination code used with CTE DB SE-A |
|
|
| Load combination code used with EA-95 (MV110) |
|
||
| Concrete block structures | Load combination code used with CTE DB SE-F |
|
|
| Timber structures | Load combination code used with CTE DB SE-M |
|
|
 USA |
Rolled and welded steel structures | Load combination code used with ANSI/AISC 360-10 (LRFD) |
|
| Load combination code used with ANSI/AISC 360-05 (LRFD) |
|
||
| Load combination code used with AISC ASD 89 |
|
||
| Load combination code used with AISC LRFD 86 |
|
||
| Cold-formed steel structures | Load combination code used with AISI/NASPEC-2007 (LRFD) (USA) |
|
|
| USA International |
Concrete structures | Load combination code used with ACI 318M-11 |
|
| Load combination code used with ACI 318M-08 |
|
||
| Load combination code used with ACI 318M-99 |
|
||
| Cold-formed steel structures | Load combination code used with AISI/NASPEC-1977 |
| |
| Acoustic insulation | ||
|---|---|---|
| EU International |
Acoustic insulation |
|
| France |
Acoustic insulation |
|
| Italy |
Acoustic insulation |
|
| Portugal |
Acoustic insulation |
|
| Spain |
Acoustic insulation |
|
| Thermal analysis and energy certification | ||
|---|---|---|
| France |
Thermal regulation |
|
| Thermal insulation |
|
|
| Italy |
Primary energy demand |
|
| Renewable energy |
|
|
| Thermal insulation |
|
|
| Technical report |
|
|
| Portugal |
New buildings and exisiting buildings |
|
| Thermal insulation |
|
|
| Spain |
Energy demand limitation |
|
| Energy consumption limitation |
|
|
| Thermal insulation |
|
|
| Simplified option |
|
|
| General option |
| |
| Safety in case of fire | ||
|---|---|---|
| Brazil |
Fire resistance of the structure |
|
| EU International |
Fire resistance of the structure |
|
| Hydraulic design of the installation |
|
|
| France |
Occupant evacuation |
|
| Morocco |
Fire safety installations |
|
| Portugal |
Hydraulic design of the installation |
|
 Singapore |
Fire safety installations |
|
| Spain |
Internal propagation |
|
| External propagation |
|
|
| Occupant evacuation |
|
|
| Fire safety installations |
|
|
| Firemen intervention |
|
|
| Fire resistance of the structure |
|
|
| Hydraulic design of the installation |
|
|
| Fire Safety in Industrial Establishments |
|
|
| USA International |
Fire resistance of the structure |
|
| Hydraulic design of the installation |
| |
| Building services | ||
|---|---|---|
| Brazil |
Water supply |
|
| Water drainage |
|
|
| Lighting |
|
|
| Electricity |
|
|
 Colombia |
Water supply |
|
| Electricity |
|
|
| EU International |
Water supply |
|
| Lighting |
|
|
| France |
Water supply |
|
| Water drainage |
|
|
| Air conditioning |
|
|
| Lighting |
|
|
| Electricity |
|
|
| Italy |
Water drainage |
|
| Mexico |
Water drainage |
|
| Portugal |
Water supply |
|
| Water drainage |
|
|
| Air conditioning |
|
|
| Lighting |
|
|
| Gas |
|
|
| Electricity |
|
|
| Telecommunication |
|
|
| Singapore |
Water supply |
|
| Water drainage |
|
|
| Spain |
Protection against humidity |
|
| Waste collection and disposal |
|
|
| Indoor air quality |
|
|
| Water supply |
|
|
| Water drainage |
|
|
| Solar capture for sanitary hot water production |
|
|
| Safety against the risk of the effects of lightning |
|
|
| Air conditioning |
|
|
| Lighting |
|
|
| Gas |
|
|
| Electricity |
|
|
| Telecommunication |
|
|
 United Kingdom |
Water supply |
|
| Water drainage |
|
|
| USA International |
Water supply |
|
| Water drainage |
|
|
| Air conditioning |
| |
Programs and design codes included in the user license
CYPE is constantly working on translating its software to other languages and on implementing worldwide design codes.
CYPE software is currently available in the following languages: Bulgarian, English, French, Galician, Italian, Portuguese for Brazil, Portuguese for Portugal, Spanish for Argentina, Spanish for Mexico and Spanish for Spain. The programs available for each language may be the same for several languages or some may have programs which are specific to the zone where the programs related to a specific language may be applied. All the programs which are available for a specific language can be installed, however, only those which have been acquired in the user license can be used.
Depending on the country where the user acquires the license (or where he/she specifically chooses to acquire it), only the design codes corresponding to that country will be activated for each program, regardless of the language in which it is installed.
The design codes and programs corresponding to other countries, which are not included in the user license, can be acquired separately. Please contact us for more information.
©CYPE Ingenieros - Av. de Loring, 4 - 03003 ALICANTE. Spain
Tel. USA (+1) 202 569 8902 // UK (+44) 20 3608 1448 // Spain (+34) 965 922 550 - Fax (+34) 965 124 950
Tel. USA (+1) 202 569 8902 // UK (+44) 20 3608 1448 // Spain (+34) 965 922 550 - Fax (+34) 965 124 950
